cold heading service
Cold heading Service

ASME B18.3 Hexagon Socket Head Shoulder Screws

ASME B18.6.3 sets dimensional standards for inch-series slotted 80° countersunk self-tapping screws. This standard defines all critical geometric controls such as head diameter, slot width and depth, thread pitch, shank diameter and 45° point angle. The 80-degree countersunk head sits flush with the workpiece surface after installation, ideal for applications where a low-profile, smooth finish is required.

These slotted countersunk tapping screws create mating threads directly in pre-drilled materials during driving. They are widely specified across automotive, electrical equipment and general fabrication projects. Our technical page provides engineering drawings and size tolerance data to support part selection, inspection and quality verification for your fastener sourcing.

ASME B18.3 Hexagon Socket Head Shoulder Screws
Stainless Steel Shoulder Screws

Specification:

ItemSpecification
StandardASME B18.3
Product TypeHexagon Socket Head Shoulder Screws
Shoulder TypeCylindrilcal Shoulder
Thread StandardASME B1.1
Thread Diameter1/8"-1-1/4"
MaterialCarbon Steel, Stainless Steel
Hardness32-43HRC
Surface TreatmentBlack Oxidation,Zinc Plated,Bright Finish
InspectionDimensions,Thread,Hardness,Coating

Dimension Chart:

Drawing of ASME B18.3 Hexagon Socket Head Shoulder Screws

Mon1/85/323/161/45/163/81/25/83/411-1/4
d max0.1230.1540.1850.2480.31050.3730.4980.6230.7480.9981.248
d min0.1210.1520.1830.2460.30850.3710.4960.6210.7460.9961.246
dk max0.250.2810.3120.3750.4380.5620.750.87511.3121.75
dk min0.2350.2660.2960.3570.4190.5430.7290.8530.9771.2871.723
k max0.1250.1250.1560.1880.2190.250.3120.3750.50.6250.75
k min0.1150.1150.1460.1770.2090.240.3020.3650.490.610.735
s0.0780.0940.0940.1250.1560.1880.250.3120.3750.50.625
t min0.0670.0670.0790.0940.1170.1410.1880.2340.2810.3750.469
d1#4#6#8#101/45/163/81/25/83/47/8
P40 UN32 UN32 UN24 UN20 UN18 UN16 UN13 UN11 UN10 UN9 UN
d2 max0.0760.10.120.1420.1930.2490.3040.4140.5210.6380.75
d2 min0.0690.0930.1120.1330.1820.2370.2910.3970.5020.6160.726
a max0.0780.0630.0690.0830.10.1110.1250.1540.1820.20.222

Mechanical Property:

ASME B18.3 – Alloy Steel

Hexagon Socket Head Shoulder Screws are manufactured from alloy steel containing chromium, nickel, molybdenum, or vanadium. They are quenched and tempered to achieve the required mechanical properties.

According to ASME B18.3, the specified hardness is 32–43 HRC throughout the cross-section. For design purposes, the screws are expected to provide a minimum tensile strength of 140,000 psi, with minimum shear strengths of 84,000 psi in both the thread neck and shoulder sections.

Mechanical PropertyRequirement
Hardness32-43HRC
Tensile Strength(min)140ksi
Shear Strength -Thread Neck(min)84Ksi
Shear Strength -Shoulder(min)84Ksi